Art's Boat Build

For the stainless steel rub rail, I decided to use the 1/2" wide, half oval type since at the back of the boat, the edge is not wide e...

Previous to cutting in the hatches, I worked on making the cut in my deck for mounting the throttle/shift control. While I had originally pl...

Can't put it off another day.... to misquote the Chambers Bros. song. I ran out of other things to work on so I finally had to come to g...

I filled the gaps on my sample board with white pigmented and thickened epoxy to see how it will look and to practice the application. After...

With the first coat of epoxy on the deck it looks almost finished....but the final finishing as well as quite a few other things are left ...

When we put in a patio I thought I would never have to stain a deck again.... After hand sanding all the deck surfaces with 220 grit, some v...

After gluing on the molding around the cockpit and motorwell area, it was time for a bit of edging. I needed a roundover bit bigger than 1/...