Thursday, July 14, 2011

A "Squirt" is Born







The arrangements were made to gather a bunch of dudes to get the boat out of the basement into the garage and on the trailer. When the prescribed time arrived our main dude, 6'6" Danny, former star member of the U of M rowing team, was still in transit from Ann Arbor. We decided to wait for his arrival. When "Big Danny" made the scene, we gathered in the birthing center in my basement and reviewed the plan to lift off the cradle, turn the baby on its side, then butt end it out of the room and over to the stairwell. Then it would bow first up the stairwell, go left around the cabinets at the top of the stairs then along side the kitchen island, back up to go around the island and then into the garage.






The paths had been cleared and the boat covered with bubble wrap and blue tape just in case there was a bump here or there. I had previously made a handle for the transom that mounted into the chrome handle locations. We needed something beefy for holding and lifting the boat while on its side and it worked perfectly.

















We had Danny on the transom to the base of the stairs where the boat was rested for a moment and I put Danny on the bow. With only a bow eye and bow handle, grip places were precious on that end. We made the joggle at the top of the stairs with a few directions and rearrangements of bodies to get the boat angled right and out she squirted from the top of the stairs. Danny got pinned into the kitchen so we immediately shifted the transom end into the room and backed it up to get around the island. As we went through the door from the kitchen to the garage, bodies peeled away off the boat as only the boat would fit through. Then Big Danny yelled "I need some help - quick" as he was the lone person on the bow of the boat holding it in the air. Since I was free (I was mostly directing), I scurried out the back porch door and around into garage to give Danny a hand as he breathed a sigh of relief and the boat came into the garage and more bodies could get back onto the move. We rolled it back over and walked it over to the trailer and set her down. I personally delivered a beer to Danny and we all commented that it was definitely worth waiting a few minutes for his arrival. Beers and drinks were distributed, bubble wrap and tape removed and pictures taken. The new baby is a beauty.

1 comment:

  1. How to Build Hollow Wood Surfboard SUP Surfboard Kit Surfboard ...
    Start building your own Hollow Wood Stand Up Paddle Board or Surfboard TODAY!
    http://clickmeterlink.com/woodensurfboardplans

    ReplyDelete